Lockouts · Don Mills
Break-In Damage Lock Repair in Don Mills
Someone smashed the little window beside the door, reached in and turned the thumb-turn.
In plain words
Break-in damage lock repair is the visit that turns a forced door back into a locked one. The locksmith first confirms you own, rent or manage the property, then looks at everything the attack touched: the lock, the bolt, the strike plate and wood behind it, the door edge, the hinges and any glass beside the door. The opening is secured before the visit ends, and the parts that gave way are replaced with stronger hardware and longer fasteners set into the framing. Any lock a taken key could open is rekeyed or replaced, so the house is closed on your terms again.
How the visit goesPolice have come and gone, the occurrence number is on a sticky note, and you are standing in a cold hallway looking at a splintered frame, wondering how the house gets locked before everyone tries to sleep.
Break-In Damage Lock Repair
How the visit goes
Photographs before parts move
Nothing on the door is touched until it has been photographed as found. The locksmith records the door face and edge, the lock and cylinder, the strike and the wood around it, the hinges, the jamb and any broken glass, plus the tool marks that show how entry was made. These images serve the police occurrence file and the insurance claim, where insurers ask for damage to be documented and damaged property kept. You are encouraged to take your own set too. Once the record exists, hardware can come off and the repair can start without anyone later wondering what the door looked like at the beginning.
Rekeying what a taken key fits
Every cylinder that a missing key could open is rekeyed or replaced before the locksmith leaves. On a serviceable pin-tumbler cylinder, the plug is slid free with a follower so the springs stay put, the bottom pins are exchanged for a new combination and a fresh key is cut; a cylinder that cannot be rekeyed this way is replaced instead. Front, back, side and garage doors are brought onto one new key where their keyways and systems allow it, and the mailbox and padlocks are handled too. Remotes for a garage opener that left in a stolen car are erased from the opener and a new one programmed. The old key still fits the keyway; it simply turns nothing anymore.
What another trade still needs to do
Locksmith hardware fixes a great deal, but a shattered frame, a broken door slab or a smashed sidelight belongs to a carpenter, door installer or glazier. When that is the case you leave with the opening secured, a clear list of what the other trade needs to do, and hardware chosen so it transfers to the new frame or door rather than being bought twice. The temporary securing is designed to hold comfortably until that work is booked. Insurers let you choose your own contractor, so the list is written for whoever you pick, and the locksmith is available to fit the final hardware once the woodwork is done.
Break-In Damage Lock Repair
In the van
Anti-lift blocks and foot bolt
Plywood and cleats for boarding
Hinge reinforcement plate
Wrap-around door edge reinforcer
Latch guard plate
Break-In Damage Lock Repair
What affects the quote
Hour of the call
Break-ins are discovered at all hours, and the amount for securing and repairing the damage is the same whatever hour that turns out to be. The locksmith confirms the exact figure on site once the extent of the damage has been assessed.
Securing now versus repairing fully
Some households want the door locked tonight and the permanent repair booked later; others want both done at once. The quote separates the two so you can choose either order without surprises.
Grade of the replacement deadbolt
A residential deadbolt with a one-inch throw and hardened insert, a heavier commercial-grade unit and a keypad or smart deadbolt sit at different points, and the quote names the one you choose.
What to have ready
- Were any keys, garage remotes or alarm codes taken?
- Is this a suite door in an apartment or condo building?
- Have the police been called, and do you have an occurrence number?
Break-In Damage Lock Repair: questions
QuestionsWill my door be boarded up, or can it be made to lock tonight?
Most forced doors lock again during the visit. If the slab and frame are sound, a new lockset goes in and the strike is reinforced. If the jamb is split, a repair plate or a boxed strike screwed into the stud usually holds it. Boarding is reserved for openings where the frame or the door itself is destroyed, and even then it is fitted so the household can get out from inside without a key.
What is a security strike box and why fit one?
A security strike is a heavier plate with a formed steel pocket that wraps around the bolt instead of leaving it in bare wood. It is set into the jamb and fixed with long screws, typically three inches, that pass through the jamb and the shim space into the framing, with the longest screws placed nearest the door stop where the bolt bears. Manufacturers specify the pocket depth so the bolt extends fully. The result spreads a kick across the wall stud rather than two small screws.
Can a split jamb be repaired, or does it need replacing?
Many can be repaired. A split along the grain is pressed back together, glued with a two-part wood epoxy and held by a steel repair plate or a boxed strike screwed through it into the stud, so the fasteners reinforce the repair as well as the lock. Missing wood is built up with filler or a fitted piece. A jamb that has pulled off the framing along its length or shattered around the pocket is replaced by a carpenter, with the opening secured until then.
Related services
- Business Lockout ServiceYou signed the lease on the unit last week and the landlord handed over possession, but the previous tenant's locks are still on both doors and no keys came with them.
- Broken Key ExtractionIn the parking lot your car key snapped in the driver's door.
- Seized & Jammed Lock OpeningEvery time you pull the key out of the side door it comes away gritty.